Fruit and vegetable juice extractor
One, working principle:
The main component of the equipment is the spiral of the bottom
diameter of the material is gradually increasing, and the pitch is
gradually reduced. When the material is pushed by the screw, the
volume of the spiral cavity is reduced.
The direction of rotation of the main shaft of the spindle is seen
in the direction of the slag chute from the feed hopper, in order
to clockwise direction.
The material is added into the hopper, and the pressing of the
material is pressed under the push of the screw, and the waste is
discharged through the annular gap formed between the conical part
of the screw and the adjusting pressure. Used for clockwise (from
the equipment of the slag groove into the hopper side to see the
rotation of the hand wheel shaft when the bearing seat, adjust the
pressure head to the left, the gap is reduced, and vice versa.
Change the size of the voids, adjust the slag resistance. Can
change the slag rate, but if the gap is too small, in a strong
squeeze, some of the slag particles and juice together through the
filter was squeezed out, although the juice increased, but the
quality of the relative decline in the size of the gap should be
determined by the user specific process requirements.
Two, installation operation and maintenance
1, the machine must be installed horizontally, and fixed with
When the device starts up, the pressure head should be adjusted to
reach the maximum, then the gap is gradually reduced, and the
position of the brake is fixed with the brake.
3, the feed must be uniform, no hard foreign bodies into the
hopper, so as not to damage the screen.
After each shift work must be washed with water and brush. If the
essence of the fiber quality of the juice is more, must be treated
as the production of the case, the increase in a washing net, after
crushing with hot water washing all the machines
Raw material handling capacity
Filter net aperture
Feed inlet size
Anhui Long maker Technology Co., Ltd. is a professional manufacturer of beverage filling production line
equipment,which has complete ability of technology research and
development, product design, machine manufacture and
presale&after-sale service. Our products are popular accepted
by domestic market and many other countries and regions.
Adds: C806 No88 of Lanzhou Road , Baohe District Hefei Anhui
Tel.: 86 551-65627867 Fax: 86 551-65627867;
Web: www.longmaker.com www.longmaker2.com
Email: firstname.lastname@example.org Contact :June